基于介形类生态特征评价湖南某铀矿山地表水放射性环境

湖南某铀矿为我国一重要铀资源生产基地，长年的矿冶活动使该铀矿冶地域生态环境不可避免地遭到了一定程度破坏。本文以该铀矿冶地域介形类为研究对象，分析其分布与生态特征，并利用该生物评价本矿冶地域地表水放射性污染状况。结果表明，Cypridopsis vidua在溪流与河流中均有分布，Helerocypris incongruens仅发现于河流，两者丰度均不高。利用该两种介形类丰度及总丰度变化可指示水体铀浓度的变化，丰度越小，铀含量越大，反之亦然。Shannon-Wiener物种多样性指数与水体铀浓度呈明显负相关，表明也可利用介形类生物指数指示水体铀浓度。该生物指数明显偏低，说明该铀矿冶地域地表水环境质量需要改善，放射性污染应引起足够重视。     

酸改性CoPd/TiO2催化CH4-CO2直接合成C2含氧化合物

采用酸处理方法对CoPd/TiO₂催化剂进行改性，并将酸改性催化剂用于温和条件下CH₄-CO₂梯阶转化直接合成C₂含氧化合物（乙酸和乙醇）的反应。在150～300℃考察了浸酸方式和不同种类酸处理对催化剂活性和选择性的影响。采用X射线衍射（XRD）、X射线光电子能谱（XPS）、NH₃程序升温脱附（NH₃-TPD）和N₂吸附对催化剂进行了表征。结果表明，酸改性明显提高了CoPd/TiO₂上C₂含氧化合物的生成速率和选择性。浸酸方式对催化剂性能和结构有显著影响，先用酸浸渍载体然后再浸渍活性金属所得催化剂具有更高的活性。在H₃PO₄、HNO₃和HCl中，H₃PO₄浸渍的催化剂活性最佳，在150℃时C₂含氧化合物（乙酸和乙醇）的生成速率为3365 μg/(g·h)，选择性达到91%。     

Doping manganese into CsPb(Cl/Br)3 quantum dots glasses: Dual-color emission and super thermal stability

CsPbX₃ (X = Cl, Br, I) perovskite quantum dots (QDs) represent bright and tunable photoluminescence, it is regrettable that the air instability and poor water resistant properties prevent their application in optoelectronic devices. At the same time, the toxicity of lead is also a major factor restricting its development. As a consequence, we demonstrate the partial replacement of Pb with Mn through conventional melt-quenching and heat-treatment method preparation of Mn-doped CsPb(Cl/Br)₃ QD glass. Mn-doped CsPb(Cl/Br)₃ QD glass exhibits high luminescent intensity like QDs. It is important that Mn-doped CsPb(Cl/Br)₃ QD glass with Dual-Color maintained the same lattice structure like Mn-doped CsPb(Cl/Br)₃ QDs, and highly homogeneous spectral characteristics of Mn luminescence. The intensity and position of this Mn-related emission are also tunable by altering the experimental parameters, such as the Pb-to-Mn feed ratio, annealing temperature. More importantly, the as-prepared orange Mn-doped CsPb(Cl/Br)₃ QD glass was employed to fabricate white LEDs combined with a commercial Ce³⁺:Y₃Al₅O₁₂ phosphor-in-glass (Ce-PiG) on top of a InGaN blue chip. And the constructed WLEDs generate a warm white with an optimal luminous efficacy (LE) of 67.00 lm/W, a high CRI of 81.4, and a low CCT of 4902 K.     

能源土边界面模型的应力更新算法及算例分析

水合物的存在会显著影响能源土的刚度、峰值强度与剪胀性。针对已有能源土模型的不足，结合边界面模型的建模思想，构建一个新的能源土边界面模型，模型参数较少，能够恰当反映能源土的应力-应变关系。计算能源土变形问题的核心在于正确积分塑性本构方程，应用完全隐式回退Euler算法，建立模型应力及塑性内变量的更新公式，并给出显式的一致性切线模量表达式。基于ABAQUS软件提供的二次开发接口，编写模型的用户材料子程序，应用已有试验数据验证程序正确性。最后应用开发的子程序对能源土的平面应变试验进行模拟，分析水合物饱和度对剪切带倾角与孔隙比的影响。     

SMTIBEA: a hybrid multi-objective optimization algorithm for configuring large constrained software product lines

Software and Systems Modeling - A key challenge to software product line engineering is to explore a huge space of various products and to find optimal or near-optimal solutions that satisfy all...     

Co-coating effect of GdPO4 and carbon on LiFePO4 cathode surface for lithium ion batteries

The electronic conductivity enhanced has been extensively studied and reported in lithium iron phosph-ate (LiFePO₄). However, only few existing literatures are available for researchers to enhance simultaneously the ion and electronic conductivity of LiFePO₄. Herein, we disclose that the LiFePO₄ is co-coated with novel GdPO₄ and Carbon via a hydrothermal-assisted solid-phase method, contributing to particle size and dispersibility. What surprising is that the ionic and electronic conductivity of the material is significantly enhanced, and the interfacial side reaction is effectively inhibited between the materials and the electrolytes. The diverse proportions of the mixed coating (LiFePO₄/C&xGdPO₄ (x = 0, 1 wt%, 2 wt%, 3 wt%, 4 wt%)) are synthesized compared with bare LiFePO₄. The experimental results suggest that LiFePO₄/C&0.03GdPO₄ exhibits the most excellent electrochemical performance. There is discharge capacity of 158, 148.8, 141.6, 134.9, 121.8, 104.9, and 86.7mAh/g at 0.1, 0.2, 0.5, 1, 2, 5, and 10 C rates, respectively.     

考虑关节角加速度约束的仿人机器人偏摆力矩控制方法

针对仿人机器人步行过程中存在的机器人关节角加速度约束影响控制性能的问题，提出一种考虑关节角加速度约束的仿人机器人偏摆力矩控制方法.该方法充分考虑了双臂在摆动过程中对偏摆力矩的影响，根据力矩平衡条件得到需要抵消的偏摆力矩的大小与方向，将偏摆力矩的控制问题转化为带约束条件的二次规划问题，并设计了一种在线变步长迭代算法计算得到优化后的双臂摆动轨迹.实验表明，该方法能有效抵消机器人步行中产生的偏摆力矩，避免控制过程中的"削峰"现象，有效提高机器人的步行稳定性.     

Fracture behaviours of brittle ceramics under elliptical ultrasonic vibration: near-to-limit contact analysis of an elastic flat punch

International Journal of Mechanics and Materials in Design - Conform and non-conformal contact problem in the face of piezoelectric motors can be hard to grasp, especially both the friction drive...